How to use Smart Calibration on Samsung Smart TV
Important Note: The information on this page is for Hong Kong products only. Models, sequences or settings will vary depending on location and/or where the product had been purchased. To be redirected to your local support page please click here.
Smart Calibration is an automatic picture calibration solution that allows you to calibrate Samsung display products at the touch of a button on your phone. With Smart Calibration, you can fine-tune the picture quality of the movie screen (Movie Mode) to the quality intended by the video creator to optimize your movie viewing experience.
Note: Your TV and phone must be connected to the same Wi-Fi network.
Watch the video on "How to use Smart Calibration on Samsung TV with SmartThings app":
The Smart Calibration feature automatically adjusts your Samsung TV's picture settings to be closer to the quality intended by the video creator when watching movies.
After Calibration, the existing picture mode is changed to Movie (Calibrated).
Compatible Devices
- Smartphone compatibility:
-Galaxy phone models released after January 2019, including the S, Note, Fold and Z Flip models.
-iPhone products released after January 2019 that support the Face ID Function.
- TV/monitor compatibility:
-Basic and Profession Mode supported
[2022] TV: Neo QLED 8K, Neo QLED4K QN90B and higher
[2023] TV: Neo QLED 8K, Neo QLED 4K QN90C and higher
Monitor: S90PC
-Basic Mode supported
[2022] TV: S95B, Q60B and higher, LS01B, LS02B, and LS03B
Monitor: Smart Monitor M70B and higher, Gaming Monitor G65NB and higher
[2023] TV: S9*C, Q60C and higher, and LS03C
Monitor: Smart Monitor M70C and higher, Gaming Monitor G95SC, and G97NC
You have to register the TV in your SmartThings app in order to use Smart Calibration.
To register your TV in SmartThings, follow below instructions. If you already registered your TV, you may skip this section.
Step 1.
Go to Settings > All Settings.
Step 2.
Select Picture.
Step 3.
Select Smart Calibration.
Step 4.
Scan the QR code with the camera app on your mobile device and follow the registration procedures as prompted.
You may also refer to below guide for more details:
Step 1. Find and tap on the TV Card which you would like to perform calibration.
Step 2. Tap Featured.
Step 3. Scroll down and tap Smart Calibration
Step 4.
Tap Start Calibration
If your model support Professional Mode, you will be prompted to choose which mode you are going to use:
① Basic Mode (15 - 30 seconds):
A simple calibration for white balance and menu optimization.
② Professional Mode (5 - 8 minutes):
A thorough calibration for 20-point white balance, grayscale linearity, gamma, and chromaticity.
Step 5.
Place the rear camera of your mobile device 1~3cm from the phone graphic on the display device screen and hold it in that position.
For the Professional Mode, It is recommended to use a tripod within dark room condition for more accurate picture calibration. It takes around 5~8 minutes or more.
For the Basic Mode
For the Professional Mode
Step 6. Tap Start at the top of your mobile screen.
Step 7. Continue to hold your mobile device for more accurate results and wait for the calibration to finish.
Step 8. After the Smart Calibration completed, you can compare Before and After calibration. Tap Done to finish.
If you choose to apply the calibrated result, you will see that the picture mode of your TV has been changed to Movie (Calibrated).
If you'd like to change the picture settings after running Smart Calibration, follow below instructions.
Step 1.
Go to Settings > All Settings.
Step 2.
Select Picture.
Step 3.
Select Picture Mode.
Step 4.
Select your desired Picture Mode from the list.
If you'd like to return your TV to its original picture settings before you ran Smart Calibration, you can reset the picture settings.
Step 1.
Go to Settings > All Settings.
Step 2.
Select Picture.
Step 3.
Select Expert Settings.
Step 4.
Select Reset Picture, then select Reset again to confirm.
Note:
- If you are having trouble with your Samsung Smart TV, you should always check to see if there are any software updates available. Downloading the latest update may fix for your problem.
- Device screenshots, function availability, setting path, menu options and layout may vary depending on the device model and software version.
If the above information does not match what your product is showing, you may check the User Manual for your product. If you are unable to solve the problem, please contact us for further assistance.
Thank you for your feedback!
Please answer all questions.
RC01_Static Content : This text is only displayed on the editor page